-
Figure 1. Unmounted wheel Outside view of 0990 YHR wheel showing carbon fiber rim and aluminum center section -
Figure 2. Wheel with tire
The aluminum center section of the wheel can come apart causing the tire and rim to unexpectedly separate from the ATV, posing a risk of serious injury if the rider loses control of the vehicle.
About 875
For additional information, contact HiPer Technology at (877) 464-4737 anytime or visit the firm's Web site at www.hiper-technology.com.
Recall Details
The recalled 9-inch ATV aftermarket rear wheels have a model number of 0990 YHR. The rear wheels were manufactured from February 15, 2005, through May 2005. The recalled wheel can be used as the rear wheel on ATVs having the following bolt patterns: four bolts on a 110mm circle or four bolts on a 115mm circle. The center section of the wheel is made of aluminum and has eight bolt holes.
Consumers should immediately stop using the 9-inch ATV wheels and contact HiPer Technology to receive a replacement wheel center section and or wheel repair, free of charge.
HiPer has 12 reports of wheel center section breakage and separation.
Note: Individual Commissioners may have statements related to this topic. Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.
If you are experiencing issues with a recall remedy or believe a company is being non-responsive to your remedy request, please use this form and explain the situation to CPSC.
Related Recalls
The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the positional stability and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.
The recalled helmets violate the mandatory safety standard for bicycle helmets because they do not comply with the positional stability, labeling and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.
The recalled bicycle lights violate the mandatory standard for consumer products with button cell and coin batteries because they contain button cell batteries that can be accessed easily by children, posing an ingestion hazard. Additionally, the bicycle lights do not have the warnings required under Reese’s Law. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns, and death.
The handlebar’s clamp can unexpectedly cause the handlebar to rotate, posing a risk of serious injury or death due to a crash hazard.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. Since the CPSC was established more than 50 years ago, it has worked to ensure the safety of consumer products, which has contributed to a decline in injuries associated with these products.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
For lifesaving information:
- Visit CPSC.gov.
- Sign up to receive our email alerts.
- Follow us on Facebook, Instagram, X, BlueSky, Threads, LinkedIn and Truth Social.
- Report a dangerous product or product-related injury on www.SaferProducts.gov.
- Call CPSC’s Hotline at 800-638-2772 (TTY 800-638-8270).
- Contact a media specialist.
