-
Image of Vernier's Go!™ Temp Temperature Sensors
When connected to a computer, a static discharge to the sensor can cause the sensor to draw too much current from the computer, causing the sensor to get hot. The sensor can get hot enough to cause a burn to the skin or damage objects in contact with it.
About 4,300
For additional information, contact Vernier Software & Technology at (888) 837-6437 between 7 a.m. and 6 p.m. PT Monday through Friday and on the firm's Web site at www.vernier.com/recall.
Recall Details
Vernier's Go!™ Temp is a temperature sensor that connects directly to a computer USB port and collects data (temperature) from the probe. The sensors are used in science classrooms. They have serial numbers 0104XXXXXXXX through 2004XXXXXXXX. The serial number is found by connecting the sensor to the computer after installing Logger Lite software, which is included with the sensor. To determine the serial number, connect the sensor, start Logger Lite, pull down the Experiment menu, choose Set Up Sensors, and choose Go!Temp. The serial number will appear in the dialog box displayed on the computer screen.
Consumers should stop using the Vernier Go!™ Temp included in this recall immediately and contact Vernier Software & Technology for a free replacement.
Vernier reported one incident in which a teacher suffered burns to her palm.
Note: Individual Commissioners may have statements related to this topic. Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.
If you are experiencing issues with a recall remedy or believe a company is being non-responsive to your remedy request, please use this form and explain the situation to CPSC.
Related Recalls
The power strips have an ungrounded metal enclosure that poses an electrocution hazard if energized, resulting in serious injury or death.
The lithium-ion batteries installed in the lanterns can overheat, posing a burn hazard to consumers.
The chargers can explode while in use, posing a fire and burn hazard.
The power strips do not contain supplementary overcurrent protection, which creates a risk of fire if the power strips are overloaded. The resulting fire can cause serious injury or death from smoke inhalation and burns.
The lithium-ion battery in the recalled power banks can overheat and ignite, posing fire and burn hazards to consumers.
The recalled toys violate the mandatory standard for toys because the screw used to secure the battery compartment that contains a button cell battery does not remain attached as required. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns, and death.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. Since the CPSC was established more than 50 years ago, it has worked to ensure the safety of consumer products, which has contributed to a decline in injuries associated with these products.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
For lifesaving information:
- Visit CPSC.gov.
- Sign up to receive our email alerts.
- Follow us on Facebook, Instagram, X, BlueSky, Threads, LinkedIn and Truth Social.
- Report a dangerous product or product-related injury on www.SaferProducts.gov.
- Call CPSC’s Hotline at 800-638-2772 (TTY 800-638-8270).
- Contact a media specialist.
