Release date: Diciembre 3, 1992

Release Details

Safety Commission Publishes Final Rules For Automatic Garage Door Openers

The entrapment protection requirements are part of a Congressional mandate in the Consumer Product Safety Improvement Act of 1990. The legislation requires that automatic residential garage door openers manufactured on or after January 1, 1991 conform to the entrapment protection requirements of the Underwriters Laboratories (UL) Standard for Safety, UL 325.

The legislation also requires that residential garage door openers manufactured on or after January 1, 1993 comply with additional entrapment protection requirements developed by UL.

The rules issued today specify these additional entrapment protection requirements. The revised standard requires that residential garage door openers contain one of the following:

-External entrapment protection device, such as an "electric eye" which "sees" an object obstructing the door without having actual contact with the object. Another similar device would be a door edge sensor. The door edge sensor acts much like the door edge sensors on elevator doors.

-Constant contact control button which is a wall-mounted button requiring a person to hold in the control button continuously for the door to close completely. If the button is released before the door closes, the door would reverse and open to the highest position. The remote control transmitter will not close the door with this option.

Additionally, all newly-manufactured garage door openers must include a sticker warning consumers of the potential entrapment hazard. The sticker is to be placed near the wall mounted control button.

The entrapment protection requirements are aimed at reducing the potential for entrapment between the edge of the garage door and the floor. Since 1982, the Commission received reports of 54 children between the ages of two and 14 who died after becoming entrapped under doors with automatic garage door openers.

CPSC urges consumers with automatic garage door openers to test the openers according to the manufacturer's recommendations, to make sure they have a reversing feature. The reversing feature should then be tested monthly. If the door fails to reverse, adjust the door according to the owner's manual or have it inspected by a professional repairman.

Additionally, owners of automatic garage door openers should teach their children about garage door safety and keep transmitters and remote controls out of children's reach.

The certification and recordkeeping requirements issued today finalize rules proposed by the Commission on March 18, 1992.

The certification rule takes effect 30 days after publication in the Federal Register. The rule requires a label on automatic residential garage door openers indicating that the opener conforms with the entrapment protection requirements of the rule. The label allows consumers to distinguish between complying and non-complying garage door openers. The label is standardized for non-UL listed garage door openers; UL listed openers can continue to use the UL logo as a certificate of compliance.

The recordkeeping rule, which also takes effect 30 days after publication in the Federal Register, requires manufacturers to maintain written records of tests that demonstrate the basis for certification.

CPSC is issuing these rules as part of its mission to protect the public from unreasonable risks of injury and death associated with consumer products. The Commission's objective is to reduce the estimated 28.5 million injuries and 21,600 deaths associated each year with the 15,000 different types of consumer products under CPSC's jurisdiction.

Contacto para los medios de comunicación

Por favor comuníquese con la CPSC si desea información al:

Teléfono: (301) 504-7908
En español: (301) 504-7800

Vea la información de contacto de expertos en materia específica