Horizon Hobby Recalls Remote Controlled Model Helicopters Due to Injury Hazard

The tail rotor grip that secures the tail rotor blade to the tail rotor hub can separate and release from the helicopter, causing it to crash.

[Missing text /cpscGlobals/recallsboilerplates/topboilerplate for vi-VN]

[Missing text /cpscGlobals/recallsboilerplates/recalldate for vi-VN]: Tháng Giêng 28, 2014
[Missing text /cpscGlobals/recallsboilerplates/recallnumber for vi-VN]: 14-091

[Missing text /cpscGlobals/recallsboilerplates/recallsummary for vi-VN]

[Missing text /cpscGlobals/recallsboilerplates/nameofproduct for vi-VN]:

Blade 500 X BNF and Blade 500 3D RTF and BNF Remote Controlled Model Helicopters

[Missing text /cpscGlobals/recallsboilerplates/hazard for vi-VN]:

The tail rotor grip used for securing the tail rotor blade to the tail rotor hub can separate and release from the helicopter, posing a risk of a crash and injury hazard.

[Missing text /cpscGlobals/recallsboilerplates/consumercontact for vi-VN]:

Horizon Hobby toll-free at (877) 504-0233 from 8 a.m. to 7 p.m. CT Monday through Friday, 8 a.m. to 5 p.m. CT Saturday, and noon to 5 p.m. CT Sunday, or online at www.horizonhobby.com, and click on Product Recalls listed under “Legal” at the bottom of the page for more information.    

[Missing text /cpscGlobals/recallsboilerplates/reportanincidentinvovlingthisproduct for vi-VN]

[Missing text /cpscGlobals/recallsboilerplates/recalldetails for vi-VN]

[Missing text /cpscGlobals/recallsboilerplates/inconjunctionwith for vi-VN]

http://healthycanadians.gc.ca/recall-alert-rappel-avis/hc-sc/2014/37741r-eng.php
[Missing text /cpscGlobals/recallsboilerplates/units for vi-VN]

About 1980 in the U.S. and 200 in Canada

[Missing text /cpscGlobals/recallDescriptionLabels/description for vi-VN]

The recall involves Blade 500 X BNF and Blade 500 3D BNF and RTF Remote Controlled Model Helicopters with model numbers BLH 1800, BLH 1800M1, BLH 1850, and BLH 4080. The helicopters are about 33.5 inches long and 11.8 inches tall and weigh about 4 lbs.  The canopy of the 500 X has the “500 X” logo on each side.  The canopy of the 500 3D has the “500 3D” logo on each side.  The tail rotor grip for each model is a black plastic holder that holds the tail rotor blades of the helicopter in place.  The grips are approximately 1 ¼ inches tall and ½ inch wide.  

[Missing text /cpscGlobals/recallsboilerplates/incidentsinjuries for vi-VN]

None

[Missing text /cpscGlobals/recallsboilerplates/remedy for vi-VN]

Consumers should immediately stop using the recalled radio-controlled helicopters and contact Horizon Hobby for a replacement tail grip and instructions for installation.

[Missing text /cpscGlobals/recallSoldAtLabels/soldat for vi-VN]

Hobby stores nationwide and at www.horizonhobby.com.  Models BLH 1800, BLH 1800M1 and BLH 1850 were sold from December 2012 through September 2013; and Models BLH 1850 and BLH 4080 were sold from May 2013 through September 2013. Prices range from $600 to $900.  

[Missing text /cpscGlobals/recallCustomFieldLabels/importer for vi-VN]

Horizon Hobby Inc., of Champaign, Ill.

[Missing text /cpscGlobals/recallCustomFieldLabels/manufacturer for vi-VN]

Shenzen Shen’s Tongchuang Aeronautic Model Co., Ltd. of China

[Missing text /cpscGlobals/recallsboilerplates/manufacturedin for vi-VN]

China

  • Horizon Hobby Model Helicopter