Brower Recalls Top Hatch Egg Incubators Due to Fire Hazard

The base of the incubator can ignite during use.

Fecha del retiro: enero 02, 2013
Número del retiro: 13-085
Ampliar fotos
  • Brower THI20 Top Hatch Incubator

    1 of 2 photos

    Brower THI20 Top Hatch Incubator

  • Recalled incubators have a crank arm that snaps into place. The crank arm is not connected by a screw

    2 of 2 photos

    Recalled incubators have a crank arm that snaps into place. The crank arm is not connected by a screw

Resumen del retiro

Nombre del producto:

Egg Incubator

Riesgo:

The base can ignite during use, posing a fire hazard to the consumer.

Contacto para los consumidores:

Brower at (800) 553-1791, from 8 a.m. to 5 p.m. CT Monday through Friday or online at www.browerequip.com/recall.pdf

Reporte un incidente con este producto

Detalles del retiro

Unidades

About 2,500

Descripción

The product is a round, light gray plastic egg incubator with a clear plastic top used to hatch many different types of eggs. The incubator is 18 inches in diameter and 12 inches tall. The recalled Model TH120 Brower Top Hatch Incubator has two main components—a tray and a base. A crank arm and a turner motor are located in the base. The crank arm snaps into place on the turner motor. The motor turns the crank arm which, in turn, rotates the tray.  The clear plastic top has an engraving which says, "THIS SIDE UP." The model number is located on the side of the packaging box.

Incidentes/Lesiones

Brower received three reports of fires, all of which resulted in property damage. No injuries have been reported.

Remedio

Consumers should immediately stop using the product and contact the company for a free replacement base.

Vendido en

Mills Fleet Farm, Stromberg's Chick and Gamebirds, Unlimited and other farm supply retailers from January 2009 to September 2010 for about $190.

Fabricado por

Brower Division of Hawkeye Steel Products Inc., of Houghton, Iowa

Fabricación en

United States

  • Brower THI20 Top Hatch Incubator

  • Recalled incubators have a crank arm that snaps into place. The crank arm is not connected by a screw