-
Recalled Crate & Barrel Toy Chest
The toy chest's lid support can fail, allowing the lid to fall onto a child's head or neck. A child could become entrapped at the neck and strangle.
About 7,000
Consumers may call Crate & Barrel at (800) 352-0688 between 8 a.m. and 5 p.m. CDT Monday through Friday.
Recall Details
WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Crate & Barrel of Northbrook, Ill., is recalling about 7,000 toy chests for in-home repair of their lids. The toy chest's lid support can fail, allowing the lid to fall onto a child's head or neck. A child could become entrapped at the neck and strangle.
CPSC and Crate & Barrel have received two reports of lids falling. In one instance, a lid fell onto a woman's head, causing her chin to strike the front edge of the chest. Through their retail stores, Crate & Barrel has received about 116 consumer requests for replacement lid supports.
The Crate & Barrel toy chests also function as benches. The seat of the bench, which is the toy chest's lid, lifts up to store toys inside. The toy chests, measuring 29 inches long, 18 inches wide and 18 inches deep, are made of maple, birch or beech wood. A 2-inch high railing encompasses the sides and the back of the chest, along with spindle-type rails on the sides. These toy chests have either one or two metal lid supports.
Crate & Barrel stores and catalogs sold the toy chests nationwide from September 1994 through March 1998 for about $130.
Consumers should immediately stop young children from using the toy chests, and call Crate & Barrel at (800) 352-0688 between 8 a.m. and 5 p.m. CDT Monday through Friday. Crate & Barrel will provide a new lid support, free of charge, to stop the lid from falling to prevent a child from being injured or fatally trapped. Consumers can make this repair easily using a regular screwdriver.
Consumers should immediately stop young children from using the toy chests, and call Crate & Barrel at (800) 352-0688 between 8 a.m. and 5 p.m. CDT Monday through Friday. Crate & Barrel will provide a new lid support, free of charge, to stop the lid from falling to prevent a child from being injured or fatally trapped. Consumers can make this repair easily using a regular screwdriver.
CPSC and Crate & Barrel have received two reports of lids falling. In one instance, a lid fell onto a woman's head, causing her chin to strike the front edge of the chest. Through their retail stores, Crate & Barrel has received about 116 consumer requests for replacement lid supports.
Note: Individual Commissioners may have statements related to this topic. Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.
Related Recalls
The helmets do not comply with the positional stability, dynamic strength of retention system, impact attenuation, and certification requirements in violation of the CPSC federal safety regulation for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury.
The portable fuel bottles do not meet the child-resistant requirements for closures under the Children's Gasoline Burn Prevention Act (CGBPA). The closure for the products is not child-resistant, posing a risk of burn and poisoning to children.
The speaker’s lithium-ion battery can overheat and catch fire, posing burn and fire hazards to consumers.
The recalled baby nests violate the safety requirements of CPSC’s Safety Standard for Infant Sleep Products, posing a suffocation risk and fall and entrapment hazards to infants. The failures include not having a stand and not meeting the requirements for side height, sleeping pad thickness, and fabric-sided openings. The product’s sides are shorter than the minimum side height limit; the sleeping pad’s thickness exceeds the maximum limit; and an infant could fall out of an enclosed opening at the foot of the lounger or become entrapped.
Additionally, the baby nest designs with head pillows violate the Safe Sleep for Babies Act of 2021’s ban on inclined sleepers for infants because their sleep surfaces are inclined greater than ten degrees. Infant fatalities have occurred in inclined sleepers, after the infants rolled from their back to their stomach or side while unrestrained, or under other circumstances.
Infants can suffocate if they roll or move on the crib bumper in a position that obstructs breathing. Padded crib bumpers are banned under the Safe Sleep for Babies Act of 2021.
The recalled children’s pajamas violate the flammability regulations for children’s sleepwear, posing a risk of burn injuries to children.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury or death associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. CPSC's work to ensure the safety of consumer products has contributed to a decline in the rate of injuries associated with consumer products over the past 50 years.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
- Visit CPSC.gov.
- Sign up to receive our e-mail alerts.
- Follow us on Facebook, Instagram @USCPSC and Twitter @USCPSC.
- Report a dangerous product or product-related injury on www.SaferProducts.gov.
- Call CPSC’s Hotline at 800-638-2772 (TTY 301-595-7054).
- Contact a media specialist.
